For decades there was just one reliable option to store data on a personal computer – having a hard drive (HDD). Having said that, this type of technology is presently expressing it’s age – hard disks are really loud and sluggish; they’re power–hungry and are likely to create lots of heat during serious procedures.

SSD drives, in contrast, are quick, take in a lot less power and they are far less hot. They offer an exciting new strategy to file access and storage and are years in front of HDDs when it comes to file read/write speed, I/O performance and also power efficacy. Discover how HDDs fare up against the newer SSD drives.

1. Access Time

Image

After the introduction of SSD drives, file access rates have gone tremendous. Because of the new electronic interfaces used in SSD drives, the average data access time has shrunk to a record low of 0.1millisecond.

Image

The technology behind HDD drives dates all the way back to 1954. And while it’s been significantly processed over the years, it’s nevertheless can’t stand up to the revolutionary concept driving SSD drives. With today’s HDD drives, the top data file access rate you’ll be able to achieve differs in between 5 and 8 milliseconds.

2. Random I/O Performance

Image

On account of the exact same revolutionary approach that enables for a lot faster access times, it’s also possible to experience greater I/O effectiveness with SSD drives. They will carry out two times as many operations within a specific time when compared with an HDD drive.

An SSD can handle a minimum of 6000 IO’s per second.

Image

Having an HDD drive, the I/O performance steadily improves the more you employ the hard drive. Having said that, in the past it actually reaches a certain limitation, it can’t get speedier. And due to the now–old technology, that I/O cap is much less than what you could find having an SSD.

HDD can only go as much as 400 IO’s per second.

3. Reliability

Image

The absence of moving elements and rotating disks within SSD drives, as well as the latest developments in electrical interface technology have ended in a much less risky data file storage device, having a common failure rate of 0.5%.

Image

As we have previously observed, HDD drives rely upon rotating hard disks. And something that employs a great number of moving elements for extented amounts of time is more prone to failure.

HDD drives’ regular rate of failing varies somewhere between 2% and 5%.

4. Energy Conservation

Image

SSDs don’t have moving parts and need little or no cooling down energy. Additionally, they require not much energy to function – trials have shown that they’ll be operated by a standard AA battery.

As a whole, SSDs take in somewhere between 2 and 5 watts.

Image

HDD drives are renowned for staying noisy. They require extra power for air conditioning reasons. On a hosting server which has a number of HDDs running continuously, you need a great number of fans to make sure they’re cooler – this may cause them a lot less energy–effective than SSD drives.

HDDs take in in between 6 and 15 watts.

5. CPU Power

Image

The swifter the data file accessibility speed is, the swifter the file demands will be handled. As a result the CPU do not need to save assets waiting for the SSD to answer back.

The regular I/O delay for SSD drives is merely 1%.

Image

Compared with SSDs, HDDs allow for slower file accessibility speeds. The CPU is going to wait for the HDD to come back the requested data file, reserving its assets in the meantime.

The common I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

Almost all of BitsHost’s brand–new servers are now using solely SSD drives. Our personal tests have demonstrated that using an SSD, the common service time for an I/O request although operating a backup continues to be under 20 ms.

Image

Using the same web server, however, this time built with HDDs, the end results were totally different. The regular service time for an I/O call changed somewhere between 400 and 500 ms.

7. Backup Rates

Image

You can actually notice the real–world added benefits of having SSD drives each day. For example, with a web server furnished with SSD drives, a full data backup is going to take simply 6 hours.

Image

Over the years, we have got worked with mostly HDD drives with our servers and we are well aware of their overall performance. With a hosting server built with HDD drives, a full server back–up often takes about 20 to 24 hours.

The Linux VPS packages as well as our typical Linux cloud packages accounts include SSD drives by default. Be part of our BitsHost family, to check out how we can assist you to improve your site.

  • Service guarantees

  •  
  • All of our Virtual Private Servers include no installation costs and work in a steady network offering 99.9% of uptime. Full root/administrator access warranted.

  • Compare our prices

  •  
  • Review the tools and capabilities offered by BitsHost’s Virtual Private Servers. You could start with a smaller VPS configuration and upgrade with only a click as your requirements expand.
  • Compare our hosting plans

  • Contact Us

  •  
  • Our representatives are available for you night and day to answer any sort of inquiries concerning our VPS platform. 1–hour response time frame warranty.